Infiniti Q60 Forums banner

Gallery

Navigation

Browse albums
Front View

Front View

  • 0
  • 0
Side View

Side View

  • 0
  • 0
Casper

Casper

  • 0
  • 0
Mini ATC Fuse Holder

Mini ATC Fuse Holder

  • 0
  • 0
A backup manual 30A Circuit Breaker I can use to replace the remote switch if I choose.

A backup manual 30A Circuit Breaker I can use to replace the remote switch if I choose.

  • 0
  • 0
I broke open the OEM fuse to see how it was put together, then used a 2nd fuse to perform the actual mods. The fuse links are connected by the "m

I broke open the OEM fuse to see how it was put together, then used a 2nd fuse to perform the actual mods. The fuse links are connected by the "m

  • 0
  • 0
Separated the fuse links, then soldered the wire leads onto each link.

Separated the fuse links, then soldered the wire leads onto each link.

  • 0
  • 0
Soldered leads complete with heat shrink sleeves.

Soldered leads complete with heat shrink sleeves.

  • 0
  • 0
Fuselinks with wire leads inserted back into the fuse case.

Fuselinks with wire leads inserted back into the fuse case.

  • 0
  • 0
Underhood driver's side fusebox with modded fuse in its proper slot. Wire leads exit hole drilled into side of fusebox then routed up into the brake

Underhood driver's side fusebox with modded fuse in its proper slot. Wire leads exit hole drilled into side of fusebox then routed up into the brake

  • 0
  • 0
Switch and fuse-holder fit in front of brake m/c with room to spare.

Switch and fuse-holder fit in front of brake m/c with room to spare.

  • 0
  • 0
Kill switch completed and "hidden" away. For warranty/dealer servicing purposes, kill switch can be easily removed and OEM fuse put back in

Kill switch completed and "hidden" away. For warranty/dealer servicing purposes, kill switch can be easily removed and OEM fuse put back in

  • 0
  • 0
JB4 Module is attached with Velcro strips, and OBD/data cable runs behind qtr panel into cabin.

JB4 Module is attached with Velcro strips, and OBD/data cable runs behind qtr panel into cabin.

  • 0
  • 0
BMS intake kit comes with washable filters, heat shields, MAF tubes, mount brackets and harware.

BMS intake kit comes with washable filters, heat shields, MAF tubes, mount brackets and harware.

  • 0
  • 0
OEM airboxes replaced with BMS CAI. BMS driver's side heat shield had to be tweaked a bit to fit properly.

OEM airboxes replaced with BMS CAI. BMS driver's side heat shield had to be tweaked a bit to fit properly.

  • 0
  • 0
BMS CAI with air deflector/radiator cover in place.

BMS CAI with air deflector/radiator cover in place.

  • 0
  • 0
645

645

  • 0
  • 0
644

644

  • 0
  • 0
643

643

  • 0
  • 0
OCC purchased online for $20, looks just like the premium brand item outside and inside.

OCC purchased online for $20, looks just like the premium brand item outside and inside.

  • 1
  • 1
Fabbed a bracket out of 1/8" aluminum sheet, mounted in same location as per M-Moto. OCC is retained by a zip tie and velcro strap with connect

Fabbed a bracket out of 1/8" aluminum sheet, mounted in same location as per M-Moto. OCC is retained by a zip tie and velcro strap with connect

  • 0
  • 0
With engine cover in place OCC is almost unnoticed.

With engine cover in place OCC is almost unnoticed.

  • 0
  • 0
q60 side pic

q60 side pic

  • 0
  • 0
[No title]

[No title]

  • 0
  • 0
[No title]

[No title]

  • 0
  • 0
Top