[dragion]

I know that fitment questions has been asked over and over, but I have a specific question regarding my current wheels from my 2019 Q50 RS400 AWD.
I have Ambit/DOSS 20x9 +35 : 245/35/20 and 20x10.5 +45 : 285/30/20...

Will these fit well with my 2017 Q60 RS400 AWD?

I do have a 5mm spacer on fronts to clear brakes and this would probably be the same case here.
I want to make sure that the rears are wide enough to be flush with this set up.

I'm on stock height suspension so no lowering/tuck.

Any helpful advice will be greatly appreciated.

Thanks!

*Wheels pictured below on a roll...

 

[rvalero]

I have 20x10.5 +45 w/ 295/30/20 tires on stock suspension, and they are not flush.

 

[dragion]

Will my set up "look" alright?
Or will they sit too far in?
Maybe adding a spacer will help...

I have 20x10.5 +45 w/ 295/30/20 tires on stock suspension, and they are not flush.

 

[rvalero]

If you want flush, you will probably need a 10-15mm spacer if you’re on stock suspension. Then again, I may be able to get my camber closer to 0 deg or whatever the specs call for. Here’s a pic from further away.

 

[dragion]

Still looking for help regarding the correct fitment for my wheels.
What I'm considering is the add a 10mm spacer in the rear and maybe a 20mm in front...?
Will this work?

Suggestions please...

 

[dragion]

Here is the comparison of the stock wheels to the Summer set up.
Please advise on what to do to make these fit correctly.

Thank you!